Model 920 Dual CPU Boards
Model 940 Quad CPU Boards

I/O Panel And Console Cable
SCSI PMC Cards
PMC Carrier Cards
Real-Time Clock & Interrupt Module (RCIM)

System Integration

Series 900 Configuration Worksheet

  Dual CPU Board

NP0920E-13-L -- 1.3 GHz Power Hawk Model 920 Dual CPU Board, 1 GB Memory

Power Hawk Model 920 6U VME CPU module that contains two 1.3 GHz MPC7457 PowerPC CPUs, 1 GB of main memory, 2 MB of L3 cache per CPU and 64 MB of flash memory. Also includes three 10/100BaseT Ethernet ports, two serial ports, nine 32-bit programmable counter/timers and two PMC slots.

Prerequisites: 6U VME chassis, disk, SCSI adapter (CM032x), CD-ROM, console and console cable. CPU board requires one VME slot. WA9200-JKDV development environment or WA9200-JKRT run-time software. I/O panel 730-1120552-904 required for accessing I/O ports. Requires System Integration (730-INT-MOT).

Note: This CPU board requires PowerMAX OS 6.3 update 2.

  Quad CPU Board

NP0940-10-L -- 1 GHz Power Hawk Model 940 Quad CPU Board, 1 GB Memory

Power Hawk Model 940 6U VME CPU module that contains four 1 GHz MPC7457 PowerPC CPUs, 1 GB of main memory, 2 MB of L3 cache per CPU and 64 MB of flash memory. Also includes two 10/100/1000BaseT Ethernet ports, four serial ports, nine 32-bit programmable counter/timers and one PMC slot.

Prerequisites: 6U VME chassis, disk, SCSI adapter (CM032x), CD-ROM, console and console cable. CPU board requires one VME slot. WA9200-JSDV development environment or WA9200-JSRT run-time software. I/O panel 730-1120552-906 required for accessing I/O ports. Requires System Integration (730-INT-MOT). Requires I/O configuration review by Concurrent before quoting.

Note: System I/O configuration must be reviewed by the home office before quoting.

I/O Panel And Console Cable

730-1120552-904 -- Model 910/920 I/O Panel

I/O panel and internal cable that provides two RJ45 female serial port connectors and three Ethernet connectors. Mounts on a system chassis.

Prerequisite: Model 910 or 920 CPU board (NP091x or NP092x)

Notes: This panel is required for externally accessing CPU board serial ports and Ethernet ports. One panel per system is recommended. Supports XON/XOFF serial flow control only.

730-1120552-906 -- Model 940 I/O Panel

I/O panel and internal cable that provides four RJ45 female serial port connectors and two Ethernet connectors. Mounts on a system chassis.

Prerequisite: Model 940 CPU board (NP094x)

Notes: This panel is required for externally accessing CPU board serial ports and Ethernet ports. One panel per system is recommended. Supports XON/XOFF serial flow control only.

730-1120531-902 -- 17-foot Console Cable

External serial cable for an ASCII console terminal.

Prerequisite: 730-1120552-904 or 730-1120552-906

SCSI PMC Cards

CM0321 -- Ultra160 SCSI PMC Module - Stackable

Stackable single-port Ultra160 SCSI PMC Module

Prerequisite: Series 900 CPU board (NP09x).

Notes: Can be mounted in CPU board PMC slot #1 when using a PMC carrier card.

CM0322 -- Ultra160 SCSI PMC Module - Non-stackable

Non-stackable single-port Ultra160 SCSI PMC Module

Prerequisite: Series 900 CPU board (NP09x)

Notes: Cannot be mounted in CPU board PMC slot #1 when using a PMC carrier card.

 PMC Carrier Cards

CA0913-3 -- Model 920 3-Slot 3.3 Volt PMC Carrier

3-slot PMC carrier card for Model 920 CPU boards. Provides 3.3 volt signaling. Requires one VME slot. Should be ordered for use with 3.3 volt or universal PMC cards.

Prerequisite: Model 920 CPU board (NP092x).

CA0913-5 -- Model 920 3-Slot 5.0 Volt PMC Carrier

3-slot PMC carrier card for Model 920 CPU boards. Provides 5.0 volt signaling. Requires one VME slot. Should be ordered for use with 5-volt-only or universal PMC cards.

Prerequisite: Model 920 CPU board (NP092x)

CA0913-3Q -- Model 940 3-Slot 3.3 Volt PMC Carrier

3-slot PMC carrier card for Model 940 CPU boards. Provides 3.3 volt signaling. Requires one VME slot. Should be ordered for use with 3.3 volt or universal PMC cards.

Prerequisite: Model 940 CPU board (NP094x).

CA0913-5Q -- Model 940 3-Slot 5.0 Volt PMC Carrier

3-slot PMC carrier card for Model 940 CPU boards. Provides 5.0 volt signaling. Requires one VME slot. Should be ordered for use with 5-volt-only or universal PMC cards.

Prerequisite: Model 940 CPU board (NP094x)

Notes: CPU board PMC slot #1 must contain either a stackable PMC card or no PMC card. (Please consult PMC Configuration Tables.) Field installation of a carrier card with previously-installed CPU board is not supported. CPU board must be returned to factory for add-on installation.

  Real-Time Clock & Interrupt Module

CM4484A -- Real-Time Clock & Interrupt Module - PMC

The Real-time Clock & Interrupt Module (RCIM) is a PMC card that includes a synchronized clock, four programmable real-time clocks, four input interrupt lines and four output interrupt lines. Also supports distributed interrupts in multi-RCIM configurations. Mounts in a standard IEEE P1386 PCI mezzanine slot. Includes synchronization cable.

Prerequisite: PMC slot on a Power Hawk CPU card (NP07x or NP09x) or PMC carrier card (CA07x3 or CA0913-x)

Notes: Can be mounted in CPU board PMC slot #1 when using a PMC carrier card, if 64-bit PMC devices will not be used on the carrier card.

DM4484 -- Documentation for CM4484 Real-time Clock & Interrupt Module

System Integration

730-INT-MOT -- System Integration

System Integration provides for factory or field integration and test of all hardware and software components as a complete system. Includes successful execution of all applicable hardware diagnostics, device drivers and factory test procedures.

Note: Includes a 90-day return-to-factory hardware warranty for Power Hawk systems.

 Series 900 Configuration Worksheet

The table below itemizes the mandatory hardware and software components of a Series 900 Power Hawk system.

Mandatory Component	Choices	Notes
CPU Module	Model 910 CPU board with 256 MB, 512 MB or 1 GB of memory (NP0910-x-x) Model 920 CPU board with 256 MB, 512 MB or 1 GB of memory (NP0920-x-x) Model 940 CPU board with 256 MB, 512 MB or 1 GB of memory (NP0940-x-x)
Chassis	12-slot 6U VME, 5-row w/P0 (SO1201-A5) 21-slot 6U VME, 5-row (SO2105-A)
Series 900 I/O Panel	730-1120552-904 or730-1120552-906	Required for access to serial and Ethernet ports
SCSI PMC Card	CM0321 or CM0322
System Disk	Catalog Disk Drives
CD-ROM	CD-ROM Drive (RD5200-A)	Required for software distribution
System Console	User PC with X Windows software or VA8692-A1
PowerMAX OS License	PowerWorks Development Environment: Model 910 (WA9200-JMDV) Model 920 (WA9200-JKDV) Model 940 (WA9200-JSDV) Encryption Utilities (WA920x-JM) or PowerWorks Run-time Environment: Model 910 (WA9200-JMRT) Model 920 (WA9200-JKRT) Model 940 (WA9200-JSRT) Encryption Utilities (WA920x-JM)	PowerWorks Development Environment Doc. Kit (DS9001) and on-line manuals

PMC Configuration Tables

The following tables list typical valid PMC configurations when configuring a PMC carrier card (CA0913-x).

Power Hawk 910 and 920

Power Hawk 940