General VME & PMC I/O Controller Product Catalog
Revised July 24, 2007

Data Acquisition I/O Boards
Graphics Cards
HSD Interface
Asynchronous Communications
IEEE488 Controller
Ethernet Controllers and Cables
Bus Expansion
Conformal Coating

Data Acquisition I/O Boards

64-Bit DIO Board

CE2510B-100 -- 64-Bit TTL I/O Board

CE2510B-100 is a 64-bit TTL I/O board which features:

Prerequisite: One VME Slot and Device Driver (WC2510-Jx or WC9210-Jx).

Note: Cables not included.

16-bit high-performance A/D converter

CE3122-000 -- 64-Channel, 16-bit High-performance analog to digital converter board

The CE3122-000 is a high-performance, 16-bit, analog-to-digital converter board which features:

Prerequisite: One VME Slot and Device Driver (WC3122-Jx or WC9242-Jx).

CE3122-010 -- 32-Channel, 16-bit High-performance analog to digital converter board

The CE3122-010 is a high-performance, 16-bit, analog-to-digital converter board which features:

Prerequisite: One VME Slot and Device Driver (WC3122-Jx or WC9242-Jx).

CE3122-020 -- 16-Channel, 16-bit High-performance analog to digital converter board

The CE3122-020 is a high-performance, 16-bit, analog-to-digital converter board which features:

Prerequisite: One VME Slot and Device Driver (WC3122-Jx or WC9242-Jx).

12-Bit Analog Output

CE4140-000 -- 32-Channel 12-Bit Analog Output Board

CE4140-000 is an intelligent 32-channel, 12-bit analog output board (D/A per channel) with autocalibration which features:

Prerequisite: One VME Slot and Device Driver (WC4140-Jx or WC9240-Jx).

Note: Cables not included.

CE4140-001 -- 16-Channel 12-Bit Analog Output Board

CE4140-001 is an intelligent 16-channel, 12-bit analog output board (D/A per channel) with autocalibration which features:

Prerequisite: One VME Slot and Device Driver (WC4140-Jx or WC9240-Jx).

Note: Cables not included.

Graphics Cards

CM0501 -- Single-Head PMC Graphics Card with 4 MB memory

High-performance, single-head PMC graphics card. Includes a Cirrus Logic CL-GD7555 64-bit graphics controller, 4 MB display memory, two PS/2 keyboard/mouse ports, VGA BIOS, and 3-foot adapter cable. Supports true 24-bit color at resolutions up to 1280 x 1024 using Xlib.

Prerequisites: One PMC slot, graphics output cable, monitor, keyboard/mouse. WA9x00-JxDV or WA9200-JxRT or WG2661-JRT. (Requires PowerMAX OS revision 5.1 or above.)

Note: Attached terminals cannot be used as the system console.

CM0504 -- Four-Head PMC Graphics Card with 4 MB memory per head

High-performance, four-head PMC graphics card. Includes four Cirrus Logic CL-GD7555 64-bit graphics controllers, 4 MB display memory per head, eight PS/2 keyboard/mouse ports, VGA BIOS, and 3-foot adapter cables. Supports true 24-bit color at resolutions up to 1280 x 1024 using Xlib.

Prerequisites: One PMC slot, graphics output cable, monitor, keyboard/mouse. WA9x00-JxDV or WA9200-JxRT or WG2661-JRT. (Requires PowerMAX OS revision 5.1 or above.)

Note: Attached terminals cannot be used as the system console.

HSD Interface

CE1005-A1 -- HSDE Channel Interface - VME

A high-performance HSD interface card that supports block mode transfers across the VME bus in order to improve performance and reduce backplane contention. This HSD board supports normal mode. To support IBL (Inter-Bus Link) modes of operation an RIQ must be submitted.

Prerequisite: One VME slot, and CX/UX or PowerMAX OS and driver WC1005-Jx or WC9205-Jx. Customer must provide cables.

Note: Maintenance pricing does not include software maintenance, see Software Model for maintenance price.

Asynchronous Communications

CE0947 -- Asynchronous Communications Multiplexer (MVC)

The 16-Line Asynchronous Communications Multiplexer with industry standard parallel port provides 16-ports of high-performance asynchronous serial communications. Supports 4-port RS-232D and RS-422 line control modules. Ports can run at speeds up through 38,400 baud.

Prerequisite: One VME slot. May be configured with up to four line control modules (CA0947-x), available I/O mounting panel positions, WC0946-Jx or WC9246-Jx and PowerMAX OS.

Note: Does not include interface cables. Not supported in a VME repeater chassis. Check home office for field installation of Line Modules. Up to four line modules may be mixed and matched. Not supported on CX/UX.

CA0947-A -- RS-232-D Line Module

Line module 4 ports of RS-232-D.

Prerequisite: CE0947 controller

CA0947-B -- RS-422 Line Module

Line module 4 ports of RS-422.

Prerequisite: CE0947 controller

  

CE0948 -- 16-line High-Performance Asynchronous Communications Multiplexor (MVCS)

High-performance 16-port asynchronous serial I/O communications multiplexor. Supports individual line rates up to 1.5 Mbps, aggregate throughput of 48 Mbps, and independent baud rates for each port. Can be configured with up to four of any mix of four-port RS-232, RS-422 and RS-485 serial line modules. An optional 16-port I/O transition panel with RJ-45 connectors and internal cable is available.

Prerequisites: One VME slot. Up to four serial line modules (CA0948-x). Power Hawk serial communications driver (WC0948-Jx or WC9248-Jx)

Note: Not supported in a VME repeater chassis. Check home office for field installation of line modules.

CA0948-A -- Four-port RS232 Serial Line Module

Prerequisite: CE0948 controller

CA0948-B -- Four-port RS-422 Serial Line Module

Prerequisite: CE0948 controller

CA0948-C -- Four-port RS-485 Serial Line Module

Prerequisite: CE0948 controller

CA0948-P -- 16-port RJ-45 I/O Transition Panel and internal cable

Prerequisite: CE0948 controller

IEEE488 Controller

 CM1055-A -- IEEE-488 GPIB Bus Interface - PMC

IEEE-488 single port GPIB bus interface PMC card for use on Power Hawk or TurboHawk systems running PowerMAX OS 4.3 or later. Compatible with IEEE488.1 and IEEE488.2 standards. Board contains FIFO buffers to decouple the GPIB activity from PCI transfers. Supports IEEE488.1 transfer rates of 1.5 Mbytes per second. Includes IEEE-488 cable.

Prerequisite: One PMC location on a Power Hawk or TurboHawk CPU card and driver (WC1055-Jx or WC9255-Jx).

Ethernet Controllers

CM01301 -- Single-port 10/100BaseT Ethernet - PMC

An Ethernet PMC controller that supports 100BaseT or 10BaseT transfers. Includes a board-to-RJ45 internal cable.

Prerequisite: One PMC slot, WA9000-JxDVx or WA9200-Jx or WC4002-Jx

CM01301A -- Stackable 10/100BaseT Ethernet - PMC

An Ethernet PMC controller that supports 100BaseT or 10BaseT transfers. Includes a board-to-RJ45 internal cable. Stackable on a Series 700 CPU board together with a PMC carrier card, i.e. three other PMC cards can be configured on the carrier card.

Prerequisite: PMC slot on a Power Hawk CPU board (NP07x) or PMC carrier card (CA07x3). WA9000-JxDVx or WA9200-Jx or WC4002-Jx.

CM01400 -- RAMiX 675 Dual 100BaseFX PMC Card

Intelligent dual 100BaseFX PMC card that includes two 100FX fiber Ethernet ports, on-board RISC co-processor, 64 Mbytes of DDR memory, failover, embedded TCP/IP firmware and trunking features. PCI 64-bit/66MHz.

Prerequisites: PMC slot on a Power Hawk 620 CPU card (NOx) or PowerMAXION (NN6418-x). RAMiX 675 driver (WC4675-Jx)

CE0938 -- Single Ethernet I/O Controller - VME

This single Ethernet I/O Controller is compatible with IEEE 802.2 and 802.3 standards. Maximum of four boards per system.

Prerequisite: One VME slot, WC4021-Jx or WC9221-Jx and WA9000-JxDVx or WA9200-JxDV or WC4002-Jx TCP/IP Frame Level software and a transceiver with cable.

Note: Ethernet package does not include transceiver or cable which is available as a separate item.

CD0938 -- Single Ethernet I/O controller - HVME

This single Ethernet I/O Controller is compatible with IEEE 802.2 and 802.3 standards. Maximum of four boards per system.

Prerequisite: One VME slot, WC4021-JF driver and WC4002-JF TCP/IP Frame Level software and a transceiver with cable.

Note: Ethernet package does not include transceiver or cable which is available as a separate item.

  Dual Ethernet I/O Controller

CE0939 -- Dual Ethernet I/O Controller - VME

This dual Ethernet I/O Controller is compatible with IEEE 802.2 and 802.3 standards. Maximum of four boards per system.

Prerequisite: One VME slot, WC4022-Jx or WC9222-Jx and WA9000-JxDVx or WA9200-Jx or WC4002-Jx TCP/IP Frame Level software and a transceiver with cable.

Note: Ethernet package does not include transceiver or cable which is available as a separate item.

CD0939 -- Dual Ethernet I/O controller - HVME

This dual Ethernet I/O Controller is compatible with IEEE 802.2 and 802.3 standards. Maximum of four boards per system.

Prerequisite: One HVME slot, WC4022-JF and WC4002-JF TCP/IP Frame Level software and a transceiver with cable.

Note: Ethernet package does not include transceiver or cable which is available as a separate item.

8492-TTR -- Thinnet Transceiver

This transceiver connects from the transceiver cable (8498) to a thin-net network.

Note: This is not included with Ethernet packages, must be ordered separately.

Prerequisite: An Ethernet controller, transceiver cable (8498).

8496-A -- Desk top Thinnet Transceiver Kit

This kit provides the necessary components to connect from an Ethernet controller to a thinnet Ethernet device such as an X-terminal with a 6 ft. cable. Includes thinnet transceiver, transceiver cable, 2 terminators, BNC Tee, and a 6 ft. thinnet cable.

Prerequisite: An Ethernet controller and appropriate software. If an X-terminal is being used as a console, then a console cable must be ordered.

8496-B -- Thinnet Transceiver Kit

This kit provides the necessary components to connect from an Ethernet controller to a thinnet Ethernet device such as an X-terminal with a 30 ft. cable. Includes thinnet transceiver, transceiver cable, 2 terminators, BNC Tee, and a 30 ft. thinnet cable.

Prerequisite: An Ethernet controller and appropriate software. If an X-terminal is being used as a console, then a console cable must be ordered.

Ethernet Cables

The transceiver cables are 78 Ohm impedance cables that connect the Ethernet controller to the Model 8492 transceiver which attaches to the Ethernet coax cable. The transceiver cables have a 15 pin sub miniature "D" type connector on each end. All transceiver cables will be the FEP type. The transceiver cable length is the distance from the computer to the Ethernet coaxial cable.

8498-FT1 -- Ethernet Transceiver Cable 32.8 ft

Bus Expansion

CE1102-A1 -- VME Repeater Kit with 5-foot cables

High-performance 6U VME repeater card set with 5-foot cables. Provides a software-transparent link. Repeats VME P1 and P2 for slave support on the repeated bus. Supports 8, 16 and 32-bit transfers, 24 and 32-bit addressing and all VMEbus interrupt levels. Propagation delay is 150 ns.

Prerequisite: Requires 1 VME slot in system chassis and 1 VME slot in an expansion chassis (SN211x).

Note: Slave support only. CE1100-A1 required for VME master support.

CE1102-A2 -- VME Repeater Kit with 10-foot cables

High-performance 6U VME repeater card set with 10-foot cables. Provides a software-transparent link. Repeats VME P1 and P2 for slave support on the repeated bus. Supports 8, 16 and 32-bit transfers, 24 and 32-bit addressing and all VMEbus interrupt levels. Propagation delay is 170 Ns

Prerequisite: Requires 1 VME slot in system chassis and 1 VME slot in an expansion chassis (SN211x).

Note: Slave support only. CE1100-A1 required for VME master support.

CE1102-A3 -- VME Repeater Kit with 25-foot cables

High-performance 6U VME repeater card set with 25-foot cables. Provides a software-transparent link. Repeats VME P1 and P2 for slave support on the repeated bus. Supports 8, 16 and 32-bit transfers, 24 and 32-bit addressing and all VMEbus interrupt levels. Propagation delay is 170 Ns

Prerequisite: Requires 1 VME slot in system chassis and 1 VME slot in an expansion chassis (SN211x).

Note: Slave support only. CE1100-A1 required for VME master support.

CE1102-A4 -- VME Repeater Kit with 50-foot cables

High-performance 6U VME repeater card set with 50-foot cables. Provides a software-transparent link. Repeats VME P1 and P2 for slave support on the repeated bus. Supports 8, 16 and 32-bit transfers, 24 and 32-bit addressing and all VMEbus interrupt levels. Propagation delay is 170 Ns

Prerequisite: Requires 1 VME slot in system chassis and 1 VME slot in an expansion chassis (SN211x).

Note: Slave support only. CE1100-A1 required for VME master support.

CE1102-A4C -- VME Repeater 50-foot cable kit

Kit of three 50-foot cables for a VME repeater card set.

Prerequisite: CE1102-A1 or CE1102-A2 or CE1102-A3

Ruggedization and Conformal Coating

CC0001 -- Conformal Coating for 6U Boards

Provides conformal coating for 6U supported boards. Requires purchase of 6U board.

CC0002 -- Conformal Coating for 9U Boards

Provides conformal coating for 9U supported boards. Requires purchase of 9U board.

CC0003 -- Conformal Coating for Daughter Cards

Provides conformal coating for supported daughter cards. Requires purchase of daughter card.